Show simple item record

contributor authorChong Wang
contributor authorGhassan S. Kassab
date accessioned2017-05-09T00:31:29Z
date available2017-05-09T00:31:29Z
date copyrightNovember, 2009
date issued2009
identifier issn0148-0731
identifier otherJBENDY-27068#114502_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/139830
description abstractThe stress distribution in the vessel wall has important bearing on vascular function including intima, media, and adventitia. The residual strain in the vessel wall has been thought to largely normalize the transmural stress distribution with slightly higher values at the intima. In hypertension, the compensatory increase in opening angle is thought to maintain a uniform stress distribution. We have recently shown that the circumferential stress at adventitia may exceed that at intima at physiological loading due to large opening angle (OA) in normal porcine coronary arteries. The objective of this study was to show that increases in opening angle subsequent hypertension can further shift the stress from the intima to the adventitia. The change in stress distribution during acute hypertension was calculated using available data on the changes in vessel geometry, material property, and internal pressure during hypertension. It was found that the increase in OA following acute hypertension off-loads the stress from intima to adventitia, therefore, relieving some of the stress increase in the intimal layer induced by the sudden pressure increase. This has important implications for hypertension where it may shift the excessive stress from the inner layer to the outer layer. This may be a protective mechanism for the intima layer in hypertension.
publisherThe American Society of Mechanical Engineers (ASME)
titleIncrease in Opening Angle in Hypertension Off-Loads the Intimal Stress: A Simulation Study
typeJournal Paper
journal volume131
journal issue11
journal titleJournal of Biomechanical Engineering
identifier doi10.1115/1.4000085
journal fristpage114502
identifier eissn1528-8951
keywordsSimulation
keywordsStress
keywordsStress concentration
keywordsVessels
keywordsPressure AND Materials properties
treeJournal of Biomechanical Engineering:;2009:;volume( 131 ):;issue: 011
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record