Drop Formation in Non-Newtonian Jets at Low Reynolds Numbers

Abstract

The objective of this study was to develop an experimentally verified computational model that accurately predicts evolution of shear-thinning liquid jets. A secondary objective was to investigate the formation of satellite drops and to determine conditions under which their diameter can be controlled. The model employs the Galerkin finite/element approach to solve the complete two-dimensional set of axisymmetric governing equations and the corresponding kinematic and dynamic boundary conditions at the free surface. The effect of shear-thinning behavior on breakup was studied in detail for the case of an infinitely long non-Newtonian jet. It was found that shear-thinning behavior may be useful in controlling satellite drop sizes. (We observe that increasing the shear-thinning behavior at Re∼5 leads to an initial increase in the satellite drop size, followed by a subsequent decrease.) Comparison of model predictions with experimental data is presented for the case of a shear-thinning non-Newtonian jet. The experimental liquid was pumped through a capillary and drop shapes obtained using a high speed camera. The experimentally obtained shapes were compared to those predicted by the model and found to be in good agreement.