Show simple item record

contributor authorP. Gaetani
contributor authorG. Persico
contributor authorV. Dossena
contributor authorC. Osnaghi
date accessioned2017-05-09T00:26:08Z
date available2017-05-09T00:26:08Z
date copyrightJuly, 2007
date issued2007
identifier issn0889-504X
identifier otherJOTUEI-28739#572_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/137019
description abstractAn extensive experimental analysis on the subject of unsteady flow field in high-pressure turbine stages was carried out at the Laboratorio di Fluidodinamica delle Macchine (LFM) of Politecnico di Milano. The research stage represents a typical modern HP gas turbine stage designed by means of three-dimensional (3D) techniques, characterized by a leaned stator and a bowed rotor and operating in high subsonic regime. The first part of the program concerns the analysis of the steady flow field in the stator-rotor axial gap by means of a conventional five-hole probe and a temperature sensor. Measurements were carried out on eight planes located at different axial positions, allowing the complete definition of the three-dimensional flow field both in absolute and relative frame of reference. The evolution of the main flow structures, such as secondary flows and vane wakes, downstream of the stator are here presented and discussed in order to evidence the stator aerodynamic performance and, in particular, the different flow field approaching the rotor blade row for the two axial gaps. This results set will support the discussion of the unsteady stator-rotor effects presented in Part II (, , , and , 2007, ASME J. Turbomach., 129(3), pp. 580–590). Furthermore, 3D time-averaged measurements downstream of the rotor were carried out at one axial distance and for two stator-rotor axial gaps. The position of the probe with respect to the stator blades is changed by rotating the stator in circumferential direction, in order to describe possible effects of the nonuniformity of the stator exit flow field downstream of the stage. Both flow fields, measured for the nominal and for a very large stator-rotor axial gap, are discussed, and results show the persistence of some stator flow structures downstream of the rotor, in particular, for the minimum axial gap. Finally, the flow fields are compared to evidence the effect of the stator-rotor axial gap on the stage performance from a time-averaged point of view.
publisherThe American Society of Mechanical Engineers (ASME)
titleInvestigation of the Flow Field in a High-Pressure Turbine Stage for Two Stator-Rotor Axial Gaps—Part I: Three-Dimensional Time-Averaged Flow Field
typeJournal Paper
journal volume129
journal issue3
journal titleJournal of Turbomachinery
identifier doi10.1115/1.2472383
journal fristpage572
journal lastpage579
identifier eissn1528-8900
treeJournal of Turbomachinery:;2007:;volume( 129 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record