Show simple item record

contributor authorGerard A. Ateshian
date accessioned2017-05-09T00:22:51Z
date available2017-05-09T00:22:51Z
date copyrightApril, 2007
date issued2007
identifier issn0148-0731
identifier otherJBENDY-26680#240_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/135286
description abstractFibrous tissues are characterized by a much higher stiffness in tension than compression. This study uses microstructural modeling to analyze the material symmetry of fibrous tissues undergoing tension and compression, to better understand how material symmetry relates to the distribution of tensed and buckled fibers. The analysis is also used to determine whether the behavior predicted from a microstructural model can be identically described by phenomenological continuum models. The analysis confirms that in the case when all the fibers are in tension in the current configuration, the material symmetry of a fibrous tissue in the corresponding reference configuration is dictated by the symmetry of its fiber angular distribution in that configuration. However, if the strain field exhibits a mix of tensile and compressive principal normal strains, the fibrous tissue is represented by a material body which consists only of those fibers which are in tension; the material symmetry of this body may be deduced from the superposition of the planes of symmetry of the strain and the planes of symmetry of the angular fiber distribution. Thus the material symmetry is dictated by the symmetry of the angular distribution of only those fibers which are in tension. Examples are provided for various fiber angular distribution symmetries. In particular, it is found that a fibrous tissue with isotropic fiber angular distribution exhibits orthotropic symmetry when subjected to a mix of tensile and compressive principal normal strains, with the planes of symmetry normal to the principal directions of the strain. This anisotropy occurs even under infinitesimal strains and is distinct from the anisotropy induced from the finite rotation of fibers. It is also noted that fibrous materials are not stable under all strain states due to the inability of fibers to sustain compression along their axis; this instability can be overcome by the incorporation of a ground matrix. It is concluded that the material response predicted using a microstructural model of the fibers cannot be described exactly by phenomenological continuum models. These results are also applicable to nonbiological fiber–composite materials.
publisherThe American Society of Mechanical Engineers (ASME)
titleAnisotropy of Fibrous Tissues in Relation to the Distribution of Tensed and Buckled Fibers
typeJournal Paper
journal volume129
journal issue2
journal titleJournal of Biomechanical Engineering
identifier doi10.1115/1.2486179
journal fristpage240
journal lastpage249
identifier eissn1528-8951
keywordsFibers
keywordsBiological tissues AND Tension
treeJournal of Biomechanical Engineering:;2007:;volume( 129 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record