| description abstract | Joint injuries during sporting activities might be reduced by understanding the extent of the dynamic motion of joints prone to injury during maneuvers performed in the field. Because instrumented spatial linkages (ISLs) have been widely used to measure joint motion, it would be useful to extend the functionality of an ISL to measure joint motion in a dynamic environment. The objectives of the work reported by this paper were to (i) design and construct an ISL that will measure dynamic joint motion in a field environment, (ii) calibrate the ISL and quantify its static measurement error, (iii) quantify dynamic measurement error due to external acceleration, and (iv) measure ankle joint complex rotation during snowboarding maneuvers performed on a snow slope. An “elbow-type” ISL was designed to measure ankle joint complex rotation throughout its range (±30deg for flexion/extension, ±15deg for internal/external rotation, and ±15deg for inversion/eversion). The ISL was calibrated with a custom six degree-of-freedom calibration device generally useful for calibrating ISLs, and static measurement errors of the ISL also were evaluated. Root-mean-squared errors (RMSEs) were 0.59deg for orientation (1.7% full scale) and 1.00mm for position (1.7% full scale). A custom dynamic fixture allowed external accelerations (5g, 0–50Hz) to be applied to the ISL in each of three linear directions. Maximum measurement deviations due to external acceleration were 0.05deg in orientation and 0.10mm in position, which were negligible in comparison to the static errors. The full functionality of the ISL for measuring joint motion in a field environment was demonstrated by measuring rotations of the ankle joint complex during snowboarding maneuvers performed on a snow slope. | |
