Show simple item record

contributor authorM. Leahy
contributor authorP. Cooper
contributor authorA. Montgomery
contributor authorD. Mba
contributor authorD. Owen
date accessioned2017-05-09T00:22:03Z
date available2017-05-09T00:22:03Z
date copyrightDecember, 2006
date issued2006
identifier issn1048-9002
identifier otherJVACEK-28883#798_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/134886
description abstractThis paper presents results of an investigation to assess the potential of the acoustic emission (AE) technology for detecting seal-to-rotor rubbing in power generation turbines. The experimental program involved inducing rubs at various axial locations along a 412ton test rotor, rotating at 3000rpm and supported by 7in.(178mm) journal bearings. Whilst there was no change in vibration levels throughout the tests, bearing mounted AE transducers successfully detected all rubbing induced on the rotor.
publisherThe American Society of Mechanical Engineers (ASME)
titleDetecting Shaft-to-Seal Rubbing in Power Generation Turbines With the Acoustic Emission Technology
typeJournal Paper
journal volume128
journal issue6
journal titleJournal of Vibration and Acoustics
identifier doi10.1115/1.2346696
journal fristpage798
journal lastpage800
identifier eissn1528-8927
keywordsAcoustic emissions
keywordsBearings
keywordsEnergy generation
keywordsRotors
keywordsTransducers
keywordsTurbines
keywordsElectric power generation AND Vibration
treeJournal of Vibration and Acoustics:;2006:;volume( 128 ):;issue: 006
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record