Show simple item record

contributor authorS. B. Glavatskih
contributor authorMichel Fillon
date accessioned2017-05-09T00:21:49Z
date available2017-05-09T00:21:49Z
date copyrightJanuary, 2006
date issued2006
identifier issn0742-4787
identifier otherJOTRE9-28738#49_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/134764
description abstractResults of a combined theoretical and experimental investigation into the operation of thrust bearings with polytetrafluoroethylene (PTFE)-faced pads are reported. Bearing performance is analyzed in terms of temperature, power loss, oil film thickness and pressure. These parameters are first calculated using a THD model. The effect of PTFE facing on bearing thermal performance is then presented and discussed. A TEHD model is subsequently employed. Obtained TEHD results show that oil film thickness and temperature are strongly affected by the PTFE layer. Theoretical results are compared with measured temperature, oil film thickness, and pressure.
publisherThe American Society of Mechanical Engineers (ASME)
titleTEHD Analysis of Thrust Bearings With PTFE-Faced Pads
typeJournal Paper
journal volume128
journal issue1
journal titleJournal of Tribology
identifier doi10.1115/1.1843833
journal fristpage49
journal lastpage58
identifier eissn1528-8897
keywordsTemperature
keywordsBearings
keywordsFilm thickness
keywordsPressure
keywordsThrust bearings
keywordsDeformation AND Thickness
treeJournal of Tribology:;2006:;volume( 128 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record