| contributor author | Jakub Pusz | |
| contributor author | Nigel M. Sammes | |
| contributor author | Alidad Mohammadi | |
| date accessioned | 2017-05-09T00:20:29Z | |
| date available | 2017-05-09T00:20:29Z | |
| date copyright | November, 2006 | |
| date issued | 2006 | |
| identifier issn | 2381-6872 | |
| identifier other | JFCSAU-28927#482_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/134035 | |
| description abstract | A solid oxide fuel cell was fabricated using standard NiO/8YSZ cermet anode, 8mol% yttria stabilized zirconia (YSZ) electrolyte, and lanthanum strontium manganite cathode. The anodes were extruded using an hydraulic ram extruder. An electrolyte was deposited using a novel technique allowing obtaining a 3–5μm thin and dense YSZ layer. The cathode was deposited by brush painting. The cells were operated under different temperature and fuel conditions, and showed excellent performance of up approximately 0.6Wcm−2 at 890°C. Performance data as well as scanning electron microscopy micrographs of the cells are presented. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Fabrication and Performance of Anode-Supported Micro-Tubular Solid Oxide Fuel Cells | |
| type | Journal Paper | |
| journal volume | 3 | |
| journal issue | 4 | |
| journal title | Journal of Fuel Cell Science and Technology | |
| identifier doi | 10.1115/1.2357747 | |
| journal fristpage | 482 | |
| journal lastpage | 486 | |
| identifier eissn | 2381-6910 | |
| keywords | Temperature | |
| keywords | Anodes | |
| keywords | Manufacturing | |
| keywords | Solid oxide fuel cells | |
| keywords | Electrolytes | |
| keywords | Testing AND Hydrogen | |
| tree | Journal of Fuel Cell Science and Technology:;2006:;volume( 003 ):;issue: 004 | |
| contenttype | Fulltext | |
