Show simple item record

contributor authorStefan Weissner
contributor authorUwe Zander
contributor authorFrank E. Talke
date accessioned2017-05-09T00:11:35Z
date available2017-05-09T00:11:35Z
date copyrightJanuary, 2003
date issued2003
identifier issn0742-4787
identifier otherJOTRE9-28712#162_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/129207
description abstractA new beam suspension model for load/unload simulations of magnetic hard disk drive sliders is presented. The model is applicable to the load/unload process as well as to the dynamic flying behavior of the slider on the disk. Suspension and gimbal are modeled with C1 continuous beam elements. The roll degree of freedom of the slider is decoupled from spacing and pitch. The numerical implementation of the model is described. Loading and unloading of a typical subambient pressure type slider is presented.
publisherThe American Society of Mechanical Engineers (ASME)
titleA New Finite-Element Based Suspension Model Including Displacement Limiters for Load/Unload Simulations
typeJournal Paper
journal volume125
journal issue1
journal titleJournal of Tribology
identifier doi10.1115/1.1506314
journal fristpage162
journal lastpage167
identifier eissn1528-8897
keywordsStress
keywordsEngineering simulation
keywordsDisplacement
keywordsDisks
keywordsFinite element analysis
keywordsDegrees of freedom AND Force
treeJournal of Tribology:;2003:;volume( 125 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record