Show simple item record

contributor authorGhanshyam Singh
contributor authorResearch Scholar
contributor authorT. Sundararajan
contributor authorK. A. Bhaskaran
date accessioned2017-05-09T00:10:29Z
date available2017-05-09T00:10:29Z
date copyrightSeptember, 2003
date issued2003
identifier issn0098-2202
identifier otherJFEGA4-27190#835_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/128554
description abstractThe present work deals with the experimental investigation of entrainment characteristics of confined/semiconfined circular and noncircular jets. The jet fluid, after issuing out of a nozzle of circular or noncircular cross section, enters a circular mixing tube of larger area, and during this process it entrains some ambient fluid into the mixing tube. The flow is incompressible and isothermal at a jet Reynolds number of 7200. The experimental results obtained in the study are first validated with the approximate theoretical analysis of Pritchard et al. (1997) and also with the similarity solution proposed by Becker et al. (1963) for circular nozzles. It is observed that the similarity solution is applicable for circular as well as noncircular jets in the region close to the jet axis and away from the nozzle exit plane. The entrainment ratio increases to a maximum value as the jet location is shifted away from the tube inlet; for the configurations studied, enhancement up to 30% has been observed in the entrainment ratio with shift in jet location. For a smaller mixing tube diameter and jet located at the inlet of the mixing tube, the circular jet entrains more than noncircular jets. For a larger mixing tube or shifted jet locations, the noncircular jets entrain more of ambient fluid, in general. Among the different noncircular geometries considered, the jet having the cross section of an isosceles triangle causes maximum entrainment.
publisherThe American Society of Mechanical Engineers (ASME)
titleMixing and Entrainment Characteristics of Circular and Noncircular Confined Jets
typeJournal Paper
journal volume125
journal issue5
journal titleJournal of Fluids Engineering
identifier doi10.1115/1.1595676
journal fristpage835
journal lastpage842
identifier eissn1528-901X
keywordsFlow (Dynamics)
keywordsJets AND Nozzles
treeJournal of Fluids Engineering:;2003:;volume( 125 ):;issue: 005
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record