Show simple item record

contributor authorScott Tashman
contributor authorWilliam Anderst
date accessioned2017-05-09T00:09:33Z
date available2017-05-09T00:09:33Z
date copyrightApril, 2003
date issued2003
identifier issn0148-0731
identifier otherJBENDY-26310#238_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/128004
description abstractDynamic assessment of three-dimensional (3D) skeletal kinematics is essential for understanding normal joint function as well as the effects of injury or disease. This paper presents a novel technique for measuring in-vivo skeletal kinematics that combines data collected from high-speed biplane radiography and static computed tomography (CT). The goals of the present study were to demonstrate that highly precise measurements can be obtained during dynamic movement studies employing high frame-rate biplane video-radiography, to develop a method for expressing joint kinematics in an anatomically relevant coordinate system and to demonstrate the application of this technique by calculating canine tibio-femoral kinematics during dynamic motion. The method consists of four components: the generation and acquisition of high frame rate biplane radiographs, identification and 3D tracking of implanted bone markers, CT-based coordinate system determination, and kinematic analysis routines for determining joint motion in anatomically based coordinates. Results from dynamic tracking of markers inserted in a phantom object showed the system bias was insignificant (−0.02 mm). The average precision in tracking implanted markers in-vivo was 0.064 mm for the distance between markers and 0.31° for the angles between markers. Across-trial standard deviations for tibio-femoral translations were similar for all three motion directions, averaging 0.14 mm (range 0.08 to 0.20 mm). Variability in tibio-femoral rotations was more dependent on rotation axis, with across-trial standard deviations averaging 1.71° for flexion/extension, 0.90° for internal/external rotation, and 0.40° for varus/valgus rotation. Advantages of this technique over traditional motion analysis methods include the elimination of skin motion artifacts, improved tracking precision and the ability to present results in a consistent anatomical reference frame.
publisherThe American Society of Mechanical Engineers (ASME)
titleIn-Vivo Measurement of Dynamic Joint Motion Using High Speed Biplane Radiography and CT: Application to Canine ACL Deficiency
typeJournal Paper
journal volume125
journal issue2
journal titleJournal of Biomechanical Engineering
identifier doi10.1115/1.1559896
journal fristpage238
journal lastpage245
identifier eissn1528-8951
keywordsMotion
keywordsStructural frames
keywordsBone
keywordsAnterior cruciate ligament
keywordsAccuracy AND Kinematics
treeJournal of Biomechanical Engineering:;2003:;volume( 125 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record