Show simple item record

contributor authorTara L. A. Moore
contributor authorLorna J. Gibson
date accessioned2017-05-09T00:09:26Z
date available2017-05-09T00:09:26Z
date copyrightDecember, 2003
date issued2003
identifier issn0148-0731
identifier otherJBENDY-26346#769_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/127914
description abstractMicrodamage, in the form of small cracks, may accumulate in trabecular bone loaded in fatigue. Specimens of bovine trabecular bone were loaded in compressive fatigue at one of four normalized stresses and loading was stopped after the specimens reached one of six maximum strains. Microdamage was identified using a fluorochrome staining technique, and microdamage parameters, including the number of damaged trabeculae and the damaged area fraction, were measured. No microdamage was observed during loading to strains below the yield strain; at higher strains, all microdamage parameters increased with increasing maximum compressive strain. Few significant differences were observed in the type or amount of microdamage accumulation between specimens loaded to the same maximum strain at different normalized stresses; however, more trabecular fractures were observed at high numbers of cycles, which corresponded to low normalized stresses.
publisherThe American Society of Mechanical Engineers (ASME)
titleFatigue Microdamage in Bovine Trabecular Bone
typeJournal Paper
journal volume125
journal issue6
journal titleJournal of Biomechanical Engineering
identifier doi10.1115/1.1631584
journal fristpage769
journal lastpage776
identifier eissn1528-8951
keywordsFatigue
keywordsStress
keywordsBone
keywordsFracture (Process) AND Cycles
treeJournal of Biomechanical Engineering:;2003:;volume( 125 ):;issue: 006
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record