| contributor author | Shiva Kalidas | |
| contributor author | Shiv G. Kapoor | |
| contributor author | Richard E. DeVor | |
| date accessioned | 2017-05-09T00:08:03Z | |
| date available | 2017-05-09T00:08:03Z | |
| date copyright | May, 2002 | |
| date issued | 2002 | |
| identifier issn | 1087-1357 | |
| identifier other | JMSEFK-27568#267_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/127107 | |
| description abstract | A finite element thermo-elastic model is devised to capture the radial errors induced in the workpiece in drilling. The temperature rise in the workpiece modeled in Part 1 of this paper is utilized in obtaining the thermo-elastic deformations in the workpiece at various process conditions. The predicted errors are compared to the average errors measured with the aid of a CMM. The predicted profiles agree well with the experimentally observed tapered hole profiles in the absence of cutting fluids. In the presence of cutting fluids the predicted radial errors only account for 10 percent of the experimentally observed errors. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Influence of Thermal Effects on Hole Quality in Dry Drilling, Part 2: Thermo-Elastic Effects on Hole Quality | |
| type | Journal Paper | |
| journal volume | 124 | |
| journal issue | 2 | |
| journal title | Journal of Manufacturing Science and Engineering | |
| identifier doi | 10.1115/1.1458014 | |
| journal fristpage | 267 | |
| journal lastpage | 274 | |
| identifier eissn | 1528-8935 | |
| keywords | Fluids | |
| keywords | Drills (Tools) | |
| keywords | Drilling | |
| keywords | Cutting | |
| keywords | Errors | |
| keywords | Deformation AND Temperature | |
| tree | Journal of Manufacturing Science and Engineering:;2002:;volume( 124 ):;issue: 002 | |
| contenttype | Fulltext | |
