Show simple item record

contributor authorRong-Fong Fung
contributor authorShih-Chien Huang
date accessioned2017-05-09T00:06:22Z
date available2017-05-09T00:06:22Z
date copyrightOctober, 2001
date issued2001
identifier issn1048-9002
identifier otherJVACEK-28859#502_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/126110
description abstractThe objective of this paper is to formulate the equations of motion and to investigate the vibrations of the atomic force microscope (AFM), which is divided into the contact and noncontact types. First, the governing equations of the AFM including both base oscillator and piezoelectric actuator are obtained using Hamilton’s principle. In the dynamic analysis, the piezoelectric layer is treated as a sensor to measure the deflection and as an actuator to excite the AFM via an external voltage. The repulsive force and van der Waals (vdW) force are considered in the contact and noncontact types of the AFM, respectively. Some important observations are made from the governing equations and boundary conditions. Finally, numerical results using a finite element method are provided to illustrate the excitation effects of base oscillator and piezoelectric actuator on the dynamic responses.
publisherThe American Society of Mechanical Engineers (ASME)
titleDynamic Modeling and Vibration Analysis of the Atomic Force Microscope
typeJournal Paper
journal volume123
journal issue4
journal titleJournal of Vibration and Acoustics
identifier doi10.1115/1.1389084
journal fristpage502
journal lastpage509
identifier eissn1528-8927
keywordsForce
keywordsAtomic force microscopy
keywordsElectric potential
keywordsDeflection
keywordsSensors
keywordsDynamic modeling
keywordsActuators AND Vibration analysis
treeJournal of Vibration and Acoustics:;2001:;volume( 123 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record