Show simple item record

contributor authorTakahisa Kato
contributor authorLeader of QMME Special Gr.
contributor authorSouta Watanabe
contributor authorHiroshige Matsuoka
date accessioned2017-05-09T00:06:11Z
date available2017-05-09T00:06:11Z
date copyrightJanuary, 2001
date issued2001
identifier issn0742-4787
identifier otherJOTRE9-28694#168_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/125984
description abstractIn Part 1, the authors presented a three-degrees-of-freedom (3-DOF) model of an in-contact headslider/disk interface (HDI) system and the equations of motion of the in-contact headslider considering the meniscus force. Dynamic characteristics of the in-contact headslider over sinusoidal disk surface were made clear. In Part 2, using the equations of motion obtained in Part 1, the calculation results for the disk with random undulation and design conditions for the in-contact HDI system are described.
publisherThe American Society of Mechanical Engineers (ASME)
titleDynamic Characteristics of an In-Contact Headslider Considering Meniscus Force: Part 2—Application to the Disk With Random Undulation and Design Conditions
typeJournal Paper
journal volume123
journal issue1
journal titleJournal of Tribology
identifier doi10.1115/1.1330741
journal fristpage168
journal lastpage174
identifier eissn1528-8897
keywordsForce
keywordsDesign
keywordsDisks AND Equations of motion
treeJournal of Tribology:;2001:;volume( 123 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record