Show simple item record

contributor authorQ. Zhao
contributor authorF. E. Talke
date accessioned2017-05-09T00:03:31Z
date available2017-05-09T00:03:31Z
date copyrightJanuary, 2000
date issued2000
identifier issn0742-4787
identifier otherJOTRE9-28685#269_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/124411
description abstractA plasticity index formula for the contact between a flat plane and crater-shaped laser bumps is derived based on contact analysis of a circular cylinder in contact with a flat plane. The plasticity index for “cylinder-on-plane” contacts differs by a scale factor from that for “sphere-on-plane” contacts while the criterion for the deformation mode is the same for both types of contacts. For a wide range of typical head/disk interface conditions, the plasticity index for “cylinder-on-plane” contacts is found to be smaller than that of “sphere-on-plane contacts.” [S0742-4787(00)03501-3]
publisherThe American Society of Mechanical Engineers (ASME)
titlePlasticity Index for Contact Between a Head and a Disk With Crater-Shaped Laser Bumps
typeJournal Paper
journal volume122
journal issue1
journal titleJournal of Tribology
identifier doi10.1115/1.555353
journal fristpage269
journal lastpage273
identifier eissn1528-8897
keywordsPlasticity
keywordsDeformation
keywordsLasers
keywordsDisks AND Cylinders
treeJournal of Tribology:;2000:;volume( 122 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record