Show simple item record

contributor authorA. M. Ahmed
contributor authorM. Tanzer
contributor authorN. A. Duncan
date accessioned2017-05-08T23:59:02Z
date available2017-05-08T23:59:02Z
date copyrightApril, 1999
date issued1999
identifier issn0148-0731
identifier otherJBENDY-26017#222_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/121819
description abstractThis study sought to determine whether a general pattern describing the three-dimensional tracking characteristics of the human patella could be established, and if not, then to determine the extent and nature of interspecimen variations in the characteristics in a normal population. Using 32 fresh-frozen knees subjected to extensor moment magnitudes similar to those in “static-lifting” and “leg-raising against resistance” maneuvers, patellar displacements were measured in the knee extension range 120 to 0 deg. For static-lifting, a constant foot-floor reaction of 334 N was applied. For leg-raising, a constant net quadriceps tension of 668 N was used throughout the extension range. Measurements were taken with a calibrated six-degree-of-freedom electromechanical goniometer and a displacement coordinate system referenced to the geometry of individual specinens. The three patellar displacements in the plane of knee extension/flexion (extension rotation, and anterior and proximal translations) consistently demonstrated the same pattern in the entire knee extension range with an average coefficient of variation of 13 percent. For knee angles greater than 45 deg, the three other displacements (medial lateral translation, and rotations about the anterior–posterior and proximal–distal axes) followed a general pattern. However, for knee angles less than 45 deg, these displacements differed considerably between specimens for each loading condition, both in terms of magnitude (average coefficient of variation: 70 percent), and direction.
publisherThe American Society of Mechanical Engineers (ASME)
titleIn Vitro Measurement of the Tracking Pattern of the Human Patella
typeJournal Paper
journal volume121
journal issue2
journal titleJournal of Biomechanical Engineering
identifier doi10.1115/1.2835107
journal fristpage222
journal lastpage228
identifier eissn1528-8951
keywordsRotation
keywordsMeasurement
keywordsElectrical resistance
keywordsDisplacement
keywordsGeometry
keywordsTension AND Knee
treeJournal of Biomechanical Engineering:;1999:;volume( 121 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record