Show simple item record

contributor authorHyun Chang Lee
contributor authorJen-Kuang Huang
contributor authorChung-Wen Chen
contributor authorMin-Hung Hsiao
date accessioned2017-05-08T23:52:10Z
date available2017-05-08T23:52:10Z
date copyrightApril, 1996
date issued1996
identifier issn1048-9002
identifier otherJVACEK-28831#169_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/117982
description abstractA method based on projection filters is presented for identifying an open-loop stochastic system with an existing feedback controller. The projection filters are derived from the relationship between the state-space model and the AutoRegressive with eXogeneous input (ARX) model including the system, Kalman filter and controller. Two ARX models are identified from the control input, closed-loop system response and feedback signal using least-squares method. Markov parameters of the open-loop system, Kalman filter and controller are then calculated from the coefficients of the identified ARX models. Finally, the state-space model of the open-loop stochastic system and the gain matrices for the Kalman filter and controller are realized. The method is validated by simulations and test data from an unstable large-angle magnetic suspension test facility.
publisherThe American Society of Mechanical Engineers (ASME)
titleIdentification of Stochastic System and Controller via Projection Filters
typeJournal Paper
journal volume118
journal issue2
journal titleJournal of Vibration and Acoustics
identifier doi10.1115/1.2889645
journal fristpage169
journal lastpage176
identifier eissn1528-8927
keywordsControl equipment
keywordsFilters
keywordsStochastic systems
keywordsKalman filters
keywordsFeedback
keywordsMagnetic levitation
keywordsEngineering simulation
keywordsClosed loop systems
keywordsOpen loop systems
keywordsSignals AND Test facilities
treeJournal of Vibration and Acoustics:;1996:;volume( 118 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record