Show simple item record

contributor authorZ. F. Sang
contributor authorG. E. O. Widera
contributor authorY. Z. Zhu
date accessioned2017-05-08T23:51:22Z
date available2017-05-08T23:51:22Z
date copyrightMay, 1996
date issued1996
identifier issn0094-9930
identifier otherJPVTAS-28368#137_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/117551
description abstractThe main purpose of this paper is to provide an applicable method to establish reliability factors for expanded tube-to-tubesheet joints. The paper also reports on the results of a preliminary study to validate experimentally the reliability efficiencies listed in Table A-2 of Appendix A of Section VIII, Division 1, of the Boiler and Pressure Vessel Code (ASME, 1986), and tightness of expanded tube-tubesheet joints. A comparison between the actual reliability factors fr determined from testing the damage strength of the joint and calculated according to Appendix A-4 of the ASME Code and those of Table A-2 is carried out. The results are discussed in light of the restrictions inherent in Table A-2. It is confirmed that some existing values of fr are conservative, while others are less so.
publisherThe American Society of Mechanical Engineers (ASME)
titleReliability Factors and Tightness of Tube-to-Tubesheet Joints
typeJournal Paper
journal volume118
journal issue2
journal titleJournal of Pressure Vessel Technology
identifier doi10.1115/1.2842171
journal fristpage137
journal lastpage141
identifier eissn1528-8978
keywordsReliability
keywordsTesting
keywordsASME Boiler and Pressure Vessel Code AND ASME Standards
treeJournal of Pressure Vessel Technology:;1996:;volume( 118 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record