Modeling and Simulation of Paraplegic Ambulation in a Reciprocating Gait Orthosis

Abstract

We developed a three dimensional, four segment, eight-degree-of-freedom model for the analysis of paraplegic ambulation in a reciprocating gait orthosis (RGO). Model development was guided by experimental analysis of a spinal cord injured individual walking in an RGO with the additional assistance of arm crutches. Body forces and torques required to produce a dynamic simulation of the RGO gait swing phase were found by solving an optimal control problem to track the recorded kinematics and ground reaction forces. We found that high upper body forces are required, not only during swing but probably also during double support to compensate for the deceleration of the body during swing, which is due to the pelvic thrust necessary to swing the leg forward. Other simulations showed that upper body forces and body deceleration during swing can be reduced substantially by producing a ballistic swing. Functional neuromuscular stimulation of the hip musculature during double support would then be required, however, to establish the initial conditions needed in a ballistic swing.