Show simple item record

contributor authorZ. Y. Wang
contributor authorJ. Jovanovic
date accessioned2017-05-08T23:41:41Z
date available2017-05-08T23:41:41Z
date copyrightJune, 1993
date issued1993
identifier issn0098-2202
identifier otherJFEGA4-27076#222_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/112142
description abstractAn experimental study of riblets with extra thin fins (5 μm thick) is presented. A drag reduction of 2–3 percent per quarter conduit wall is indicated when h+ is around 3–15 in a square section of air flow conduit lined with the extra-thin-fin-riblets (ETFR) on one side wall. The pressure distributions along the conduit indicate the influence of the riblet front step on the drag reduction performance in the conduit flow. The measurement methods and the detailed structure of the ETFR are also discussed.
publisherThe American Society of Mechanical Engineers (ASME)
titleDrag Characteristics of Extra-Thin-Fin-Riblets in an Air Flow Conduit
typeJournal Paper
journal volume115
journal issue2
journal titleJournal of Fluids Engineering
identifier doi10.1115/1.2910127
journal fristpage222
journal lastpage226
identifier eissn1528-901X
keywordsAir flow
keywordsDrag (Fluid dynamics)
keywordsDrag reduction
keywordsFins
keywordsPressure AND Flow (Dynamics)
treeJournal of Fluids Engineering:;1993:;volume( 115 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record