Show simple item record

contributor authorJohn Girard
contributor authorScott Abrahamson
date accessioned2017-05-08T23:41:39Z
date available2017-05-08T23:41:39Z
date copyrightSeptember, 1993
date issued1993
identifier issn0098-2202
identifier otherJFEGA4-27077#408_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/112111
description abstractThe effects of hub ventilation on the flow structure between corotating disks enclosed in a stationary cylindrical shroud have been studied using quantitative flow visualization. The ventilation flow resulted from the pumping of the rotating disks. The geometry of the ventilation holes and the total open area were varied and the flow structure was compared to the solid hub case. Many of the features present in the solid hub case remained in modified form. The radial extent of the region purged by the through-flow was independent of the hub open area, which ranged from 3.4 to 37.5 percent of the total hub area. Additionally, the radial extent of the purged region was found to be independent of the Reynolds number.
publisherThe American Society of Mechanical Engineers (ASME)
titleOn the Flow Structure Due to Corotating Disks With a Ventilated Hub
typeJournal Paper
journal volume115
journal issue3
journal titleJournal of Fluids Engineering
identifier doi10.1115/1.2910153
journal fristpage408
journal lastpage410
identifier eissn1528-901X
keywordsFlow (Dynamics)
keywordsDisks
keywordsVentilation
keywordsGeometry
keywordsRotating Disks
keywordsReynolds number AND Flow visualization
treeJournal of Fluids Engineering:;1993:;volume( 115 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record