Show simple item record

contributor authorHuang Ping
contributor authorWen Shizhu
date accessioned2017-05-08T23:39:46Z
date available2017-05-08T23:39:46Z
date copyrightJanuary, 1992
date issued1992
identifier issn0742-4787
identifier otherJOTRE9-28494#42_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/110995
description abstractMicro-EHL problems of line contact have been solved by Newton-Raphson method. The results are given from the zero roughness amplitude to the value higher than the film thickness in the smooth surface solution. With the increase of the roughness amplitude, cavitations may be found inside the contact region. This situation is predicted by a critical roughness amplitude. The solutions are also given after the roughness exceeds to the critical value. From the results it is found that the film thickness is still thick enough even if the roughness is very high. The other factors to influence on the pressure and film thickness, such as loads, roughness wavelengths and oil compressibility, are considered as well.
publisherThe American Society of Mechanical Engineers (ASME)
titleStudy on Oil Film and Pressure Distribution of Micro-EHL
typeJournal Paper
journal volume114
journal issue1
journal titleJournal of Tribology
identifier doi10.1115/1.2920865
journal fristpage42
journal lastpage46
identifier eissn1528-8897
keywordsPressure
keywordsSurface roughness
keywordsFilm thickness
keywordsNewton's method
keywordsStress
keywordsCompressibility AND Wavelength
treeJournal of Tribology:;1992:;volume( 114 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record