| contributor author | A. Chaaban | |
| contributor author | A. Bazergui | |
| contributor author | H. Ma | |
| date accessioned | 2017-05-08T23:39:24Z | |
| date available | 2017-05-08T23:39:24Z | |
| date copyright | February, 1992 | |
| date issued | 1992 | |
| identifier issn | 0094-9930 | |
| identifier other | JPVTAS-28333#19_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/110787 | |
| description abstract | The tube-to-tubesheet joint analysis can be greatly simplified by considering a single tube surrounded by an annular sleeve representing the tubesheet. One of the problems is how to choose the appropriate outer diameter of the annular sleeve model. In this paper, the nonlinear finite element method and some other analytical solutions were used to investigate this problem. Due to the many dimension, fabrication, and material-related parameters, the orthogonal design method was used to minimize the number of calculations while providing an accurate understanding of the influence of all involved parameters. Based on the results, empirical equations for determining the equivalent external sleeve diameter that can be used in the single-tube model and for approximating the residual contact pressure, are proposed. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Tube-Tubesheet Joint: A Proposed Equation for the Equivalent Sleeve Diameter Used in the Single-Tube Model | |
| type | Journal Paper | |
| journal volume | 114 | |
| journal issue | 1 | |
| journal title | Journal of Pressure Vessel Technology | |
| identifier doi | 10.1115/1.2929006 | |
| journal fristpage | 19 | |
| journal lastpage | 22 | |
| identifier eissn | 1528-8978 | |
| keywords | Equations | |
| keywords | Pressure | |
| keywords | Dimensions | |
| keywords | Manufacturing | |
| keywords | Finite element methods AND Design methodology | |
| tree | Journal of Pressure Vessel Technology:;1992:;volume( 114 ):;issue: 001 | |
| contenttype | Fulltext | |
