Show simple item record

contributor authorYuan-Fang Chou
contributor authorWern-Cheng Yeh
date accessioned2017-05-08T23:37:04Z
date available2017-05-08T23:37:04Z
date copyrightOctober, 1991
date issued1991
identifier issn1048-9002
identifier otherJVACEK-28799#441_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/109464
description abstractThe method presented in this paper can predict the modal parameters of a rotating blade accurately via the easily measured modal parameters of the blade in the nonrotating state. The derivation of the eigenvalue problem in nonrotating modal coordinates is based on the continuum model of general linear elastic solids such that it can be applied to complex real structures. Therefore, the modal parameters for different rotating speeds can be found without testing the blade under each different rotating speed. Experiments were conducted to check the proposed method. The results showed that the predicted characteristics were in good agreement with the measured characteristics.
publisherThe American Society of Mechanical Engineers (ASME)
titlePrediction of Rotating Blade Modes from Measured Nonrotating Modal Parameters
typeJournal Paper
journal volume113
journal issue4
journal titleJournal of Vibration and Acoustics
identifier doi10.1115/1.2930205
journal fristpage441
journal lastpage447
identifier eissn1528-8927
keywordsRotating blades
keywordsBlades
keywordsEigenvalues
keywordsSolids AND Testing
treeJournal of Vibration and Acoustics:;1991:;volume( 113 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record