| contributor author | P. J. Lefebvre | |
| contributor author | W. W. Durgin | |
| date accessioned | 2017-05-08T23:32:59Z | |
| date available | 2017-05-08T23:32:59Z | |
| date copyright | March, 1990 | |
| date issued | 1990 | |
| identifier issn | 0098-2202 | |
| identifier other | JFEGA4-27047#12_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/107117 | |
| description abstract | An electromagnetic flowmeter was developed to measure transient flows at a data rate of 60 Hz. The approach taken was to develop suitable electronics to replace the electronics of a commercially available electromagnetic flowmeter normally used for steady-state operation. Use of the commercially available flowmeter body, which includes the magnetic coils, core, and signal electrodes, provided a relatively economical means of fabricating the transient flowmeter. A transient flow calibration facility consisting of a free-falling water column was also designed and built. Results of the calibrations are presented and show that the flowmeter can accurately measure transient flows up to the maximum observed acceleration of approximately 1 g. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | A Transient Electromagnetic Flowmeter and Calibration Facility | |
| type | Journal Paper | |
| journal volume | 112 | |
| journal issue | 1 | |
| journal title | Journal of Fluids Engineering | |
| identifier doi | 10.1115/1.2909360 | |
| journal fristpage | 12 | |
| journal lastpage | 15 | |
| identifier eissn | 1528-901X | |
| keywords | Calibration | |
| keywords | Flowmeters | |
| keywords | Flow (Dynamics) | |
| keywords | Electronics | |
| keywords | Electrodes | |
| keywords | Signals | |
| keywords | Steady state AND Water | |
| tree | Journal of Fluids Engineering:;1990:;volume( 112 ):;issue: 001 | |
| contenttype | Fulltext | |
