Show simple item record

contributor authorDali J. Patel
contributor authorRamesh N. Vaishnav
contributor authorJafar Vossoughi
contributor authorLaVal N. Cothran
contributor authorBernell R. Coleman
contributor authorEleanor L. Ison-Franklin
date accessioned2017-05-08T23:32:07Z
date available2017-05-08T23:32:07Z
date copyrightFebruary, 1990
date issued1990
identifier issn0148-0731
identifier otherJBENDY-25855#70_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/106610
description abstractInflation-extension experiments were carried out on segments of the descending thoracic aortas from 4 normotensive and 4 hypertensive dogs rendered hypertensive using either unilateral or bilateral renal artery constriction. Intravascular pressures up to 200 mm Hg and axial forces up to 200 g were used. The external diameter of the segment and the distance between two longitudinally spaced gage marks were recorded photographically at each pressure-force level combination. Dimensions in the undeformed configuration were measured at the end of the inflation-extension experiment. Data were analyzed for changes in geometry and force-deformation response. Results indicate that: 1. Under sustained hypertension the wall thickness in the undeformed configuration increases with a concurrent reduction in the in-situ longitudinal extension ratio. 2. This dual tissue response accomplishes substantial reductions in the circumferential and longitudinal stresses from the levels that would be reached at equivlaent pressures in the absence of these geometric changes. 3. At comparable intravascular pressures the extensibility in the circumferential direction is slightly greater for the hypertensive aortas as compared to normals. However, the stress-extension ratio relationship in the circumferential direction is similar in the two groups. 4. The stress-extension ratio relationship in the longitudinal direction indicates that the hypertensive aorta is stiffer than its normotensive counterpart.
publisherThe American Society of Mechanical Engineers (ASME)
titleEffect of Hypertension on Elasticity and Geometry of Aortic Tissue From Dogs
typeJournal Paper
journal volume112
journal issue1
journal titleJournal of Biomechanical Engineering
identifier doi10.1115/1.2891128
journal fristpage70
journal lastpage74
identifier eissn1528-8951
keywordsElasticity
keywordsBiological tissues
keywordsGeometry
keywordsAorta
keywordsForce
keywordsStress
keywordsInflationary universe
keywordsPressure
keywordsDeformation
keywordsGages
keywordsDimensions
keywordsKidney AND Wall thickness
treeJournal of Biomechanical Engineering:;1990:;volume( 112 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record