Show simple item record

contributor authorE.-S. Chan
contributor authorW. K. Melville
date accessioned2017-05-08T23:30:43Z
date available2017-05-08T23:30:43Z
date copyrightMay, 1989
date issued1989
identifier issn0892-7219
identifier otherJMOEEX-28058#92_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/105812
description abstractAn experimental study of deepwater plunging wave loads on vertical walls and cylinders is reported. Simultaneous measurements of the forces and pressures are obtained. The characteristics of the impact loads are presented and the scaling of pressures from model results to prototype scales is discussed. Overall, the characteristics of forces and pressures vary systematically with the structure’s location relative to the wave-breaking location. Impacts on cylinders are similar to those on a flat plate; however, the presence of the wall has a larger influence on the dynamics of impact compared to that of the cylinder.
publisherThe American Society of Mechanical Engineers (ASME)
titlePlunging Wave Forces on Surface-Piercing Structures
typeJournal Paper
journal volume111
journal issue2
journal titleJournal of Offshore Mechanics and Arctic Engineering
identifier doi10.1115/1.3257093
journal fristpage92
journal lastpage100
identifier eissn1528-896X
keywordsDynamics (Mechanics)
keywordsForce
keywordsMeasurement
keywordsStress
keywordsWaves
keywordsEngineering prototypes
keywordsCylinders
keywordsFlat plates AND Wave forces
treeJournal of Offshore Mechanics and Arctic Engineering:;1989:;volume( 111 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record