| contributor author | M. S. Reddy | |
| contributor author | V. K. Jain | |
| contributor author | G. K. Lal | |
| date accessioned | 2017-05-08T23:27:36Z | |
| date available | 2017-05-08T23:27:36Z | |
| date copyright | May, 1988 | |
| date issued | 1988 | |
| identifier issn | 1087-1357 | |
| identifier other | JMSEFK-27730#111_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/104127 | |
| description abstract | A simple model for tool (cathode) design for plane parallel electrochemical machining and electrochemical drilling has been proposed. Assuming the initial tool shape to be complementary to required work shape, the desirable and predicted anode profiles have been compared and the error between them has been evaluated. Using this error, the correction factor has been calculated to modify the tool shape. This procedure is repeated till the designed tool can produce an anode profile within the prescribed tolerance limits. Using this technique, tools for tapered, flat, exponential, parabolic, and nonstandard work shapes have been designed. Bare tools have been designed for straight and tapered sided holes. Comparison between analytical and experimental results shows a good agreement between them. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Tool Design for ECM: Correction Factor Method | |
| type | Journal Paper | |
| journal volume | 110 | |
| journal issue | 2 | |
| journal title | Journal of Manufacturing Science and Engineering | |
| identifier doi | 10.1115/1.3187858 | |
| journal fristpage | 111 | |
| journal lastpage | 118 | |
| identifier eissn | 1528-8935 | |
| keywords | Design | |
| keywords | Shapes | |
| keywords | Equipment and tools | |
| keywords | Errors | |
| keywords | Anodes | |
| keywords | Drilling AND Machining | |
| tree | Journal of Manufacturing Science and Engineering:;1988:;volume( 110 ):;issue: 002 | |
| contenttype | Fulltext | |
