Show simple item record

contributor authorSorin Siegler
contributor authorJie Chen
contributor authorC. D. Schneck
date accessioned2017-05-08T23:26:43Z
date available2017-05-08T23:26:43Z
date copyrightNovember, 1988
date issued1988
identifier issn0148-0731
identifier otherJBENDY-25841#364_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/103642
description abstractThe in-vitro, three dimensional kinematic characteristics of the human ankle and subtalar joint were investigated in this study. The main goals of this investigation were: 1) To determine the range of motion of the foot-shank complex and the associated range of motion of the ankle and subtalar joints; 2) To determine the kinematic coupling characteristics of the foot-shank complex, and 3) To identify the relationship between movements at the ankle and subtalar joints and the resulting motion produced between the foot and the shank. The tests were conducted on fifteen fresh amputated lower limbs and consisted of incrementally displacing the foot with respect to the shank while the motion of the articulating bones was measured through a three dimensional position data acquisition system. The kinematic analysis was based on the helical axis parameters describing the incremental displacements between any two of the three articulating bones and on a joint coordinate system used to describe the relative position between the bones. From the results of this investigation it was concluded that: 1) The range of motion of the foot-shank complex in any direction (dorsiflexion/plantarflexion, inversion/eversion and internal rotation/external rotation) is larger than that of either the ankle joint or the subtalar joint.; 2) Large kinematic coupling values are present at the foot-shank complex in inversion/eversion and in internal rotation/external rotation. However, only a slight amount of coupling was observed to occur in dorsiflexion/plantarflexion.; 3) Neither the ankle joint nor the subtalar joint are acting as ideal hinge joints with a fixed axis of rotation.; 4) Motion of the foot-shank complex in any direction is the result of rotations at both the ankle and the subtalar joints. However, the contribution of the ankle joint to dorsiflexion/plantarflexion of the foot-shank complex is larger than that of the subtalar joint and the contribution of the subtalar joint to inversion/eversion is larger than that of the ankle joint.; 5) The ankle and the subtalar joints have an approximately equal contribution to internal rotation/external rotation movements of the foot-shank complex.
publisherThe American Society of Mechanical Engineers (ASME)
titleThe Three-Dimensional Kinematics and Flexibility Characteristics of the Human Ankle and Subtalar Joints—Part I: Kinematics
typeJournal Paper
journal volume110
journal issue4
journal titleJournal of Biomechanical Engineering
identifier doi10.1115/1.3108455
journal fristpage364
journal lastpage373
identifier eissn1528-8951
keywordsKinematics
keywordsRotation
keywordsPlasticity
keywordsMotion
keywordsHinges
keywordsBone AND Data acquisition systems
treeJournal of Biomechanical Engineering:;1988:;volume( 110 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record