Show simple item record

contributor authorA. F. Lehman
contributor authorJ. O. Young
date accessioned2017-05-08T23:23:06Z
date available2017-05-08T23:23:06Z
date copyrightJune, 1964
date issued1964
identifier issn0098-2202
identifier otherJFEGA4-27254#275_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/101490
description abstractExperiments with water in a high speed recirculating water tunnel were undertaken to measure the pressures at which incipient and desinent cavitation occurred. Incipient cavitation is defined as the onset of cavitation; desinent cavitation is defined as the cessation of cavitation. The two lucite test sections used formed the minimum area region of the nozzle in the water tunnel. One test section had a smoothly changing internal contour and the other had an abrupt contour change at the entrance to the cylindrical throat region. Cavitation in the abrupt contour occurred at the throat entrance at higher pressures than the cavitation pressures in the smooth contour. The cavitation in the smooth contour occurred at the entrance to the diffuser part of the nozzle. It was concluded that the cavitation pressures and cavitation numbers increased with velocity, the increase being greater for the abrupt contour with the exception of minimums indicated at incipient conditions in the abrupt contour at throat velocities near 88 ft/sec. A notable difference between the incipient and desinent cavitation numbers and pressures occurred for the abrupt contour, but not for the smooth contour using the techniques described for identifying the incipient and desinent cavitation regimes.
publisherThe American Society of Mechanical Engineers (ASME)
titleExperimental Investigations of Incipient and Desinent Cavitation
typeJournal Paper
journal volume86
journal issue2
journal titleJournal of Fluids Engineering
identifier doi10.1115/1.3653059
journal fristpage275
journal lastpage281
identifier eissn1528-901X
keywordsCavitation
keywordsWater tunnels
keywordsNozzles
keywordsWater AND Diffusers
treeJournal of Fluids Engineering:;1964:;volume( 086 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record