Show simple item record

contributor authorL. J. McLean
contributor authorE. J. Hahn
date accessioned2017-05-08T23:21:17Z
date available2017-05-08T23:21:17Z
date copyrightJuly, 1985
date issued1985
identifier issn0742-4787
identifier otherJOTRE9-28445#402_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/100458
description abstractA technique is presented for investigating the stability of and the degree of damping in the circular synchronous orbit equilibrium solutions pertaining to radially symmetric multi-mass flexible rotor bearing systems. It involves the analysis of appropriate linearized perturbation equations about the equilibrium solutions and is applicable to systems with several squeeze film dampers. For a system with a single damper, stability threshold maps, independent of unbalance distribution, may be found in terms of the same damper parameters and operating conditions as the equilibrium solutions, thereby allowing for damper design and performance monitoring. The technique is illustrated for a simple symmetric four degree of freedom flexible rotor with an unpressurized damper. This example shows the utility of zero frequency stability maps for delineating multiple solution possibilities and that for low (in this case of the order of 0.06 or lower) bearing parameters, the introduction of an unpressurized squeeze film damper may promote instability in an otherwise stable system.
publisherThe American Society of Mechanical Engineers (ASME)
titleStability of Squeeze Film Damped Multi-Mass Flexible Rotor Bearing Systems
typeJournal Paper
journal volume107
journal issue3
journal titleJournal of Tribology
identifier doi10.1115/1.3261094
journal fristpage402
journal lastpage409
identifier eissn1528-8897
keywordsBearings
keywordsStability
keywordsRotors
keywordsDampers
keywordsEquilibrium (Physics)
keywordsDegrees of freedom
keywordsEquations
keywordsDamping AND Design
treeJournal of Tribology:;1985:;volume( 107 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record