| contributor author | Tae Hyong Chong | |
| contributor author | A. Kubo | |
| date accessioned | 2017-05-08T23:20:49Z | |
| date available | 2017-05-08T23:20:49Z | |
| date copyright | September, 1985 | |
| date issued | 1985 | |
| identifier issn | 1050-0472 | |
| identifier other | JMDEDB-28055#418_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/100185 | |
| description abstract | Tooth fillet and root stresses of an internal spur gear which is fixed by bolts or supported by pinned coupling were measured. The stress values are compared with those obtained by the simple calculation method developed in the previous reports [1, 2] and with those by the FEM calculation. Those values have shown fairly good agreement, and the validity of this calculation method is shown. The difference of the stress state for the cases of bolt fixing internal gear and of roller supporting internal gear is discussed. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Simple Stress Formulae for a Thin-Rimmed Spur Gear. Part 3: Examination of the Calculation Method and Stress State of Internal Spur Gear | |
| type | Journal Paper | |
| journal volume | 107 | |
| journal issue | 3 | |
| journal title | Journal of Mechanical Design | |
| identifier doi | 10.1115/1.3260735 | |
| journal fristpage | 418 | |
| journal lastpage | 422 | |
| identifier eissn | 1528-9001 | |
| keywords | Stress | |
| keywords | Gears | |
| keywords | Formulas | |
| keywords | Spur gears | |
| keywords | Rollers | |
| keywords | Finite element model AND Finite element methods | |
| tree | Journal of Mechanical Design:;1985:;volume( 107 ):;issue: 003 | |
| contenttype | Fulltext | |
