Search
CSV
RISA Probabilistic Wavelet–Support Vector Regression Model for Streamflow Forecasting with Rainfall and Climate Information Input
Publisher: American Meteorological Society
Abstract: t is essential to explore reliable streamflow forecasting techniques for water resources management. In this study, a Bayesian wavelet?support vector regression model (BWS model) is developed for one- and multistep-ahead ...
Thermomechanical Analysis of Film-on-Substrate System With Temperature-Dependent Properties
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Thermomechanical analysis of global and local buckling is presented to show temperature effects on the stress/strain and shape of a film-on-substrate system. First, the strain is expressed as a ...
Modeling and Computation for the High-Speed Rotating Flexible Structure
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper is presented to improve the modeling accuracy and the computational stability for a high-speed rotating flexible structure. The differential governing equations are derived based on ...
Geometric Reasoning on Molding Planning for Multishot Mold Design
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper presents algorithms for automated design of multishot molds for manufacturing multimaterial or multicolor objects, and focuses on molding planning that determines a sequence of mold ...
Research on Erection Methods of Steel Stiffening Truss Girder for Baling River Bridge
Publisher: American Society of Civil Engineers
Abstract: Four methods of erecting steel stiffening truss girder of suspension bridge, including the deck lifting gantry crane method, the cable-mounted crane method, the cantilever erection method with derrick crane and the incremental ...
A Global Correction Process for Flat Optics With Patterned Polishing Pad
Publisher: American Society of Mechanical Engineers (ASME)
Abstract: To improve the efficiency of flat optics fabrication, a global correction method with the patterned polishing pad is developed in this paper. Through creating grooves on a polishing pad, the contact pressure distribution ...
Prediction of Surface Profile Evolution of Workpiece and Lapping Plate in Lapping Process
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Lapping has a history of hundreds of years, yet it still relies on the experience of workers. To improve the automaticity and controllability of the lapping process, a modeling method of friction and wear is developed to ...
Effect of Internal Mechanical Environment of Porous Scaffolds on Mechano-driven Bone Ingrowth: A Numerical Study
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Porous cages with lower global stiffness induce more bone ingrowth and enhance bone-implant anchorage. However, it's dangerous for spinal fusion cages, which usually act as stabilizers, to sacrifice global stiffness for ...
Analytical Elastic–Plastic Cutting Model for Predicting Grain Depth-of-Cut in Ultrafine Grinding of Silicon Wafer
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Grain depth-of-cut, which is the predominant factor determining the surface morphology, grinding force, and subsurface damage, has a significant impact on the surface quality of the finished part made of hard and brittle ...
Residual Stress Distribution in Silicon Wafers Machined by Rotational Grinding
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Subsurface damage (SSD) and grinding damage-induced stress (GDIS) are a focus of attention in the study of grinding mechanisms. Our previous study proposed a load identification method and analyzed the GDIS in a silicon ...