Abstract: The method presented in this paper can predict the modal parameters of a rotating blade accurately via the easily measured modal parameters of the blade in the nonrotating state. The derivation ...

Abstract: Small and lightweight structures have very high natural frequencies and small elastic displacement compared to ordinary structures. Due to limited excitation bandwidth and relatively large size ...

Abstract: When using a shaker to conduct receptance function measurements, it is usual to put a stinger between the shaker and a force transducer that is attached to a test structure. Ideally, a stinger ...

Abstract: The research on deep-sea hydrothermal fluids, cold springs, and other bottom water bodies has important implications for ecosystems. But the deep-sea environment is very harsh, and many existing sampling devices cannot ...

Abstract: The dynamic and static response of a nonuniform beam with nonhomogeneous elastic boundary conditions is studied by generalizing the method of Mindlin-Goodman and utilizing the exact solutions of ...

Abstract: The current paper discusses the selection of Manson–Haferd and Larson–Miller constants on correlation results of creep rupture property in several heat-resistant steels. It indicates that the ...

Abstract: Steam discharged into subcooled water is investigated experimentally to demonstrate the direct contact condensation phenomena in nuclear reactor safety system and underwater propulsion apparatus. The steam jet condenses ...

Abstract: Loess is one of the problematic soils with a worldwide distribution for its collapsibility. To study structural strength and parameters of collapsible loess, a number of double-oedometer tests on intact and remolded loess ...

Abstract: The experimental results of three full-scale two-story, two-bay, composite steel frames under furnace loading are described briefly. During tests, the composite beams and steel columns were exposed to fire, and only the ...

Abstract: The experimental results of three full-scale two-story, two-bay, composite steel frames under furnace loading are described briefly. During tests, the composite beams and steel columns were exposed to fire, and only the ...