Abstract: This paper presents a novel methodology that addresses the limited predictive capability of the existing crystal plasticity (CP) method in interfaces modeling. Our approach incorporates interfacial parameters generated ...

Abstract: Feedback control has been pursued to address the rotating stall problem in axial flow compressors in order to extend the stable operating range and to improve engine performance. These controllers ...

Abstract: Feedback control has been pursued to stabilize the bifurcated operating solution near the rotating stall point in axial-flow compressors. These controllers can extend the stable operating range ...

Abstract: In this work, the characteristic data of the peaks of the incremental capacity (IC) curves, the constant-current (CC) charging time, and their neighborhoods were determined during the CC charging phases of a battery. These ...

Abstract: Numerous studies on traffic safety have demonstrated the likelihood of accidents closely associated with the tire–road friction coefficient (TRFC). However, under complex working conditions, it is difficult to accurately ...

Abstract: There are many kinds of hot-mixed epoxy resins on the market with uneven performance, which makes it difficult to select the excellent performing material. This study investigated the effects of glass transition temperature ...

Abstract: Proper temperature control is essential for producing superior quality components and yielding high production rates in high temperature manufacturing processes. Due to the closure of machine tools ...

Abstract: The very high temperature gas-cooled reactor (VHTR), with dual capacities of highly efficient electricity generation and thermochemical production of hydrogen, is considered as one of the most ...

Abstract: This study aims to establish an appropriate method to calculate the bearing deformation of large-diameter bored piles in alluvial deposits with soils characterized mainly by medium-dense to dense silt, fine sand, and plastic ...