Search
CSV
RISUniaxial Experiments on Idealized Asphalt Mixes
Publisher: American Society of Civil Engineers
Abstract: This paper contains details of uniaxial compression experiments on various idealized asphalt mixes with volume fractions of aggregate ranging from 40 to 85%. The compression experiments are performed over a wide range of ...
Micromechanical Modeling of Steady-State Deformation in Asphalt
Publisher: American Society of Civil Engineers
Abstract: A micromechanical model for the steady-state deformation of idealized asphalt mixes is presented. Triaxial compression tests were conducted on idealized asphalt mixes and the volumetric and deviatoric strains were measured. ...
Models of Particle Reinforced Nonlinear-Viscous Composite
Publisher: American Society of Civil Engineers
Abstract: Two new models are described for a composite consisting of a nonlinear viscous matrix reinforced by rigid particulate inclusions: (1) An analytical plane strain solution for a uniform regular array of rigid hexagonal ...
Closure to “Discussion of ‘The Resistance of Clamped Sandwich Beams to Shock Loading’ ” (2005, ASME J. Appl. Mech., 72, pp.)
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The authors, Fleck and Deshpande (FD), are grateful for the interest shown in their work (1) by Tan et al. (2).
The Resistance of Clamped Sandwich Beams to Shock Loading
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A systematic design procedure has been developed for analyzing the blast resistance of clamped sandwich beams. The structural response of the sandwich beam is split into three sequential steps: ...
Control of Uncertain Nonlinear Systems Using an Uncertainty and Disturbance Estimator
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In this paper, we extend a recently developed method (Zhong and Rees, 2004, “Control of Uncertain LTI Systems Based on an Uncertainty and Disturbance Estimator,” ASME J. Dyn. Syst., Meas., ...
Sandwich Beams With Corrugated and Y-frame Cores: Does the Back Face Contribute to the Bending Response?
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Stainless steel sandwich beams with a corrugated core or a Y-frame core have been tested in three-point bending and the role of the face-sheets has been assessed by considering beams with (i) ...
The Dynamic Strength of a Representative Double Layer Prismatic Core: A Combined Experimental, Numerical, and Analytical Assessment
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Dynamic out-of-plane compressive testing was used to characterize the dynamic strength of stainless steel prismatic cores with representative double layer topology to be employed in sandwich panels ...
Dynamic Response of a Clamped Circular Sandwich Plate Subject to Shock Loading
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: An analytical model is developed for the deformation response of clamped circular sandwich plates subjected to shock loading in air and in water. The deformation history is divided into three ...
The Underwater Blast Resistance of Metallic Sandwich Beams With Prismatic Lattice Cores
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The finite element method is used to evaluate the underwater blast resistance of monolithic beams and sandwich beams containing prismatic lattice cores (Y-frame and corrugated core) and an ideal ...