Search
Now showing items 1-5 of 5
Effects of Clearance on the Performance of a Labyrinth Seal Under Wet-Gas Conditions
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The labyrinth seal is one of the most popular noncontact annular seals used in centrifugal compressors to improve machine efficiency by reducing the secondary flow leakage. Reducing the radial clearance Cr can effectively ...
A Study on the Leakage and Rotordynamic Coefficients of a Long-Smooth Seal With Laminar-Two-Phase, Mainly-Oil Mixtures
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper conducts a comprehensive study on the effects of the presence of air in the oil on the leakage and rotordynamic coefficients of a long-smooth seal (inner diameter D = 89.306 mm, radial clearance Cr = 0.140 mm, ...
Test Results for the Static and Rotordynamic Characteristics of a Long (L/D = 0.75) Smooth Seal in Two-Phase (Mainly Gas) Conditions With a 62-Bar Inlet Pressure
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Recent multiphase-pump developments encountered several rotordynamic issues with smooth balance-piston seals, creating a need to better understand the performance of annular seals under multiphase-flow operation. This paper ...
Experimental Study of the Leakage and Rotordynamic Coefficients of a Long-Smooth Seal With Two-Phase, Mainly Oil Mixtures
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper experimentally studies the leakage and rotordynamic performance of a long-smooth seal with air–oil mixtures. Tests are performed with inlet gas-volume-fraction gas volume fraction (GVF) = 0%, 2%, 4%, 6%, and ...
Preswirl and Mixed-Flow (Mainly Liquid) Effects on Rotordynamic Performance of a Long (L/D = 0.75) Smooth Seal
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Measured results are presented for rotordynamic coefficients and mass leakage rates of a long smooth annular seal (length-to-diameter ratio L/D = 0.75, diameter D = 114.686 mm, and radial clearance Cr = 0.200 mm) tested ...