Search
CSV
RISBrittle Crack Arrestability and Inverse Fracture in DWTT
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The drop-weight tear test (DWTT) has been widely used to evaluate the resistance of linepipe steels against brittle crack propagation, and the shear area fraction SA% in the DWTT has been adopted in the requirement for the ...
Investigation of Bulging Behavior of Coke Drum—A Practical Analysis of Bulging Under Complex Quench Conditions
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Coke drums undergo cyclic operations typically in the temperature range from room temperature to about 500 آ°C (930 آ°F). During quenching, the coke drum is inevitably subjected to a rapid drop in temperature because ...
Investigation of Bulging Behavior of Coke Drum: Feasible Study on Causes of Bulging
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Coke drums undergo cyclic operations typically in the temperature range from ambient temperature to about 500 آ°C (930 آ°F). During quenching, the coke drum is inevitably subjected to a rapid drop in temperature because ...
Inverse Fracture in DWTT and Brittle Crack Behavior in Large-Scale Brittle Crack Arrest Test
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The drop weight tear test (DWTT) has been widely used to evaluate the resistance of linepipe steels against brittle fracture propagation. Although there is an ambiguity in the evaluation of DWTT results if inverse fracture ...
Damage Caused by Dynamic/Cyclic Loading of a Detonation Chamber
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The plastic damage caused by multiple dynamic loading and its influence on the ductility and toughness of 3.5% Ni steel (SA203E) and C steel (SA516M) were examined for the discussion of integrity design of detonation ...