Search
CSV
RISDevelopment of Nanocomposite Grease: Microstructure, Flow, and Tribological Studies
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Greases are widely used for variety of applications at extreme pressures, temperatures, and speeds with obligation of high bearing and shaft life with low noise. The present study deals with the development of nanocomposite ...
Tribological and Vibration Studies on Newly Developed Nanocomposite Greases Under Boundary Lubrication Regime
Publisher: The American Society of Mechanical Engineers (ASME)
Tribo-Dynamics of Nanocomposite Grease Lubricated Point Contact Under Elastohydrodynamics Lubrication Regime
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Friction is usually induced when the contacts are in relative motion, leading to mechanical vibration and consequently heat generation. The reduction of these undesirable parameters is possible by the application of greases, ...
Rheological and Film Forming Behavior of the Developed Nanocomposite Greases Under Elastohydrodynamics Lubrication Regime
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Performance of grease lubricated point contact under elastohydrodynamics lubrication (EHL) regime is critical in many engineering applications. The present work deals with the evaluation of rheological, film forming ...
Comparative Studies of Microstructural, Mechanical, and Tribological Behavior of A319 Alloy Cast in Solid Waste Mold and Conventional Sand Mold
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This study investigates the potential of utilizing industrial solid waste (blast furnace slag, ferrochrome slag, and red mud) as mold materials to improve the solidification rate and wear resistance of A319 alloy. Unlike ...