Search
CSV
RISEffects of Flame Lift-Off on the Differences Between the Diffusion Flames From Circular and Elliptic Burners
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: An experimental study conducted to determine the effects of lifting the flame base off the burner rim on the differences between the flame characteristics of diffusion flames from circular and ...
Flame Structure and Pollutant Emission Characteristics of a Burning Kerosene Spray With Injection of Diluents
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: An experimental study of the effects of diluent gas injection on the structure and pollutant emissions of a kerosene spray from a twin fluid atomizer is presented. Nitrogen and carbon dioxide ...
Effects of Location and Direction of Diluent Injection on Radiation and Pollutant Emissions of a Burning Spray
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Introduction of diluents into diffusion flames is an effective method of changing their combustion and pollutant emission characteristics. Since the dominant thermochemical processes vary from ...
Nitric Oxide Emission From Pulverized Coal Blend Flames
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: An experimental study of the nitric oxide emission from pulverized blended coal flames as a function of blending mass ratio is presented. Coals of three ranks (anthracite, bituminous, and ...
Effects of Heating on Two-Dimensional Mixing Layers
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Transverse profiles of temperature and the mean velocities in the streamwise direction in a horizontal shear layer are presented. The variation of vorticity thickness along the streamwise coordinate ...
Effects of Jet Reynolds Number on the Performance of Axisymmetric and Nonaxisymmetric Gas Burner Flames
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: An investigation of the effects of burner exit Reynolds number on the relative effects of burner geometry (circular and elliptic with an aspect ratio 2:4) in a propane jet flame is presented. ...
Comparison of the Flame Characteristics of Turbulent Circular and Elliptic Jets in a Crossflow
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This study was directed to understand the coupling effects of the noncircular geometry of the burner and a crossflow on the combustion of gas jets. This paper compares the characteristics of ...
Effects of Nozzle Orientation on the Structure and Emissions of Spray Flames
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: An experimental study of the effects of the orientation of the liquid fuel stream relative to the air stream from a twin fluid atomizer located in an open-jet wind tunnel is presented. The ...
An Experimental Study of the Interaction of Multiple Liquid Pool Fires
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The risk of accidental spills and possible fires is high in the storage and handling of large quantities of flammable liquids. Such liquid pool fires are generally buoyancy-driven and emit a ...
Application of Noncircular Primary-Air Inlet Geometries in the Inshot Burners of Residential Gas Furnaces
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Experiments with an inshot burner used in residential natural gas furnaces are presented. The concentrations of NOx , NO, and CO in the combustion products of partially aerated natural gas ...