Search
Now showing items 1-6 of 6
Different Flame Patterns Linked With Swirling Injector Interactions in an Annular Combustor
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Experiments in cold and reactive conditions carried out in linear arrays of injectors indicate that the flows established by neighboring injectors exhibit alternating patterns if the distance between two injectors is too ...
Large Eddy Simulation of Light-Round in an Annular Combustor With Liquid Spray Injection and Comparison With Experiments
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The light-round is defined as the process by which the flame initiated by an ignition spark propagates from burner to burner in an annular combustor, eventually leading to a stable combustion. Combining experiments and ...
Strong Azimuthal Combustion Instabilities in a Spray Annular Chamber With Intermittent Partial Blow-Off
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This article reports experiments carried out in the MICCA-spray combustor developed at EM2C laboratory. This system comprises 16 swirl spray injectors. Liquid n-heptane is injected by simplex atomizers. The combustion ...
Flame and Spray Dynamics During the Light-Round Process in an Annular System Equipped With Multiple Swirl Spray Injectors
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A successful ignition in an annular multi-injector combustor follows a sequence of steps. The first injector is ignited; two arch-shaped flame branches nearly perpendicular to the combustor backplane form; they propagate, ...
Impact of Heat Release Distribution on the Spinning Modes of an Annular Combustor With Multiple Matrix Burners
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The present article reports a numerical analysis of instability coupled by a spinning mode in an annular combustor. This corresponds to experiments carried out on the MICCA test facility equipped with 16 matrix burners. ...
Large-Eddy Simulation of Flame Dynamics During the Ignition of a Swirling Injector Unit and Comparison With Experiments
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: During the ignition of a swirled single-injector combustor, two phases have been identified experimentally. In the first, the flame penetrates the injection unit, while in the second, the flame lifts off after a substantial ...