Abstract: The mission of the ASME JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY is to provide the research, development, and applications community with a timely forum for archival research and development ...

Abstract: SOFC numerical simulations and experiments are a low cost method in achieving adequate performance to penetrate the market. Most of the efforts are at the present focused on components, single ...

Abstract: A simple and mass productive extrusion technique was applied to fabricate anode-supported tubular solid oxide fuel cells (SOFCs). A standard NiO/8YSZ (nickel oxide/8 mol % yttria stabilized ...

Abstract: A solid oxide fuel cell was fabricated using standard NiO/8YSZ cermet anode, 8mol% yttria stabilized zirconia (YSZ) electrolyte, and lanthanum strontium manganite cathode. The anodes were extruded ...

Abstract: The environmental benefits related to fuel cells can be enhanced if hydrogen is produced through an environmental friendly practice. Gasification has been widely usied for decades for syngas ...

Abstract: Bi2O3 doped scandia stabilized zirconia systems have shown promise for use as electrolytes in intermediate temperature solid oxide fuel cells (IT-SOFC's). Sintering properties, crystal phase ...

Abstract: Strontium- and magnesium-doped lanthanum gallate (LSGM) has been considered as a promising electrolyte for solid oxide fuel cell (SOFC) systems in recent years. In this work synthesis, electrochemical ...

Abstract: A planar anode-supported electrolyte was fabricated using a tape casting method that involved a single step cofiring process. A standard NiO∕8YSZ cermet anode, 8mol% YSZ electrolyte, and a ...