Search
Now showing items 1-6 of 6
Determination of Incompressible Flow Friction in Smooth Circular and Noncircular Passages: A Generalized Approach Including Validation of the Nearly Century Old Hydraulic Diameter Concept
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: It has been demonstrated conclusively that the widely observed differences in data for frictional pressure coefficient between circular and noncircular passages derive from the inseparably connected ...
Impingement Heat Transfer Within Arrays of Circular Jets: Part II—Effects of Crossflow in the Presence of Roughness Elements
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: An experimental investigation was carried out to determine the effects of jet-induced crossflow on impingement heat transfer from rough surfaces. The jets impinged on surfaces having repeated ...
The Flow Pattern in a Scalene Triangular Duct Having Two Rounded Corners
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Experiments were carried out to determine the pressure drop characteristics and mean velocity distributions in a scalene triangualr duct having two rounded corners. The present data for friction ...
Entrainment by Turbulent Jets Issuing From Sharp-Edged Inlet Round Nozzles
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Experiments were carried out to determine entrainment rates by turbulent air jets generated with square-edged inlet round nozzles. A parametric study was made which included the effects of ...
Direct Determination of the Onset of Transition to Turbulence in Flow Passages
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Easily applied methods are proposed, based on tests with air and water, for direct determination of the onset of transition in flow passages using static and dynamic wall pressure data. With ...
Correlation of Adiabatic Two-Phase Pressure Drop Data Using the Frictional Law of Corresponding States
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A method, based on that developed for single-phase flow, is proposed for the correlation of two-phase frictional pressure drop data. It is validated using air-water data obtained on small ...
CSV
RIS