Search
CSV
RISStudy on Dimensional Tolerances Required for Miniature C(T) Specimens
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The Master Curve approach using miniature C(T) specimens with 4 mm thickness is promising for directly determining the reference temperature of reactor pressure vessel (RPV) steels because they can be taken from the broken ...
Failure Experiments on Pipes With Local Wall Thinning Subjected to Multi-Axial Loads
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Piping lines in nuclear power plants may experience multi-axial loads including tensile force, bending, and torsion moments during operation. There is a lack of guidance for failure evaluation of locally wall-thinned pipes ...
Experimental Investigation of Net Section Collapse Criterion for Circumferentially Cracked Cylinders Subjected to Torsional Moment
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: When a cracklikeflaw is detected in piping during inservice inspection, the limit load criterion given in the codes such as JSME Rules on FitnessforService for Nuclear Power Plants or ASME Boiler and Pressure Vessel Code ...
Experimental Study on Failure Estimation Method for Circumferentially Cracked Pipes Subjected to Multi-Axial Loads
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: When a crack is detected in a piping line during in-service inspections, failure estimation method provided in ASME Boiler and Pressure Vessel Code Section XI (ASME Code Section XI) or JSME Rules on Fitness-for-Service for ...
Rational Determination of Lower Bound Fracture Toughness Curves Using Master Curve Approach
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The Master Curve gives the relation between the median of fracture toughness of ferritic steels and the temperature in the ductile–brittle transition temperature region. The procedure used to determine the Master Curve ...
Experimental Investigation of Failure Estimation Method for Circumferentially Cracked Pipes Subjected to Combined Bending and Torsion Moments
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: When a crack is detected in a nuclear piping system during inservice inspections, failure estimation method provided in codes such as ASME Boiler and Pressure Vessel Code Section XI or JSME Rules on FitnessforService for ...
Experimental Investigation of Failure Estimation Method for Stainless Steel Pipes With a Circumferential Crack Subjected to Combined Tensile and Torsion Loads
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: When a crack is detected in a stainless steel pipe during inservice inspections, the failure estimation method given in codes such as the ASME Boiler and Pressure Vessel Code Section XI or JSME Rules on FitnessforService ...
Benchmark Analysis of Ductile Fracture Simulation for Circumferentially Cracked Pipes Subjected to Bending
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: To predict fracture behavior for ductile materials, some ductile fracture simulation methods different from classical approaches have been investigated based on appropriate models of ductile fracture. For the future use ...