Abstract: This paper considers the stabilization problem of a continuous linear system over a communication channel with networkinduced delay. The channel is of finite data rate and connects the measurement sensor to the controller. ...

Abstract: Solid-state hot press bonding is an advanced joining process wherein two specimens can be joined under high pressure for a period of time at an elevated temperature. The main step in hot press bonding is the void closure ...

Abstract: The cross section of thermoplastic composite pipes (TCPs) consists of three layers: an inner liner, reinforcement laminates, and an outer jacket; the three layers are fully bonded together to form a solid-walled structure. ...

Abstract: An open parabolic cylindrical shell panel plays a key role in radial signal collection, reflection, and/or transmission applied to radar antennas, space reflectors, solar collectors, etc. Active vibration control can ...

Abstract: This article presents a numerical study of particle deposition in two fluids, i.e., liquid and droplet flow in a single row tube bundle heat exchanger. The tubes in the heat exchanger are modeled as heating sources. Two ...

Abstract: Wire and nonparallel plate electrode-type electrostatic air accelerators have attracted significant interest. The physical process involved in using accelerators is complicated. Moreover, mechanisms are unclear, especially ...

Abstract: Based on the generalized differential quadrature (GDQ) method, this paper presents, for the first instance, the free-vibration behavior of a rotating thin truncated open conical shell panel. The present governing equations ...

Abstract: This article presents a numerical study of particle deposition in two fluids, i.e., liquid and droplet flow in a single row tube bundle heat exchanger. The tubes in the heat exchanger are modeled as heating sources. Two ...