Search
CSV
RISA Reference Stress Approach to the Steady Creep Deformation of Pipe Bends With End Constraints
Publisher: The American Society of Mechanical Engineers (ASME)
In-Plane Bending Behavior of Pipe Bends With End Constraints Under Steady-State Creep
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper presents an analysis for the in-plane bending behavior of smooth thin pipe bends connected to tangent pipes or rigid flanges under steady-state creep conditions. Creep flexibility ...
Formability Analysis of Magnesium Alloy Sheets at Elevated Temperatures With Experimental and Numerical Method
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper describes a study in which thermomechanical properties of wrought magnesium were thoroughly investigated. The formability of the magnesium based alloy sheet at the elevated temperatures ...
Formability and Weld Zone Analysis of Tailor-Welded Blanks for Various Thickness Ratios
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Cold-rolled steel sheets of thicknesses ranging from 0.5 to 1.0 mm were used to produce tailor-welded blanks (TWBs) with various thickness ratios. In this study, the formability of the TWBs, ...
Experimental and Theoretical Analysis on Formability of Aluminum Tailor-Welded Blanks
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper presents an investigation on forming limits of tailor-welded blanks (TWBs) made of 5754-O aluminum sheets using both experimental and numerical approaches. TWBs may be composed of two ...
Formability Analysis of Tailor-Welded Blanks of Different Thickness Ratios
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper presents a formability analysis of tailor-welded blanks (TWBs) made of cold rolled steel sheets with varying thicknesses. Steel sheets ranging between 0.5 mm, 0.6 mm, 0.7 mm, 0.8 ...