Search
Now showing items 1-8 of 8
Analysis of Hydrostatic Journal Bearings With End Seals
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: An approximate analysis for the pressure field and dynamic force coefficients in turbulent flow, centered hydrostatic journal bearings (HJBs) with fluid inertia and liquid compressibility effects ...
Theoretical and Experimental Comparisons for Damping Coefficients of a Short-Length Open-End Squeeze Film Damper
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Squeeze film dampers (SFD) provide load isolation and attenuate rotor vibrations in high speed turbomachinery. Operating parameters such as whirl frequency, amplitude of journal motion, and value ...
Experimental Pressures and Film Forces in a Squeeze Film Damper
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The effect of whirl frequency and lubricant viscosity on the dynamic pressures and force response of an open end and a partially sealed squeeze film dampers (SFD) with a radial clearance of ...
Effect of Fluid Inertia on the Performance of Squeeze Film Damper Supported Rotors
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The effect of fluid inertia on the synchronous steady-state operation of a centrally preloaded single mass flexible rotor supported in squeeze film bearing dampers is examined theoretically. For ...
Reduction of the Dynamic Load Capacity in a Squeeze Film Damper Operating With a Bubbly Lubricant
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Squeeze film dampers (SFDs) are effective means to reduce vibrations and to suppress instabilities in rotor-bearing systems. However, at operating conditions while traversing critical speeds with ...
Air Entrainment Versus Lubricant Vaporization in Squeeze Film Dampers: An Experimental Assessment of Their Fundamental Differences
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Squeeze film dampers (SFDs) provide structural isolation and energy dissipation in air-breathing engines and process gas compressors. However, SFDs are prone to develop a flow regime where the ...
Dynamic Force Response of an Open-Ended Squeeze Film Damper
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The effects of whirl frequency and lubricant viscosity on the experimental pressure field and film forces in an open-ended squeeze film damper test rig are presented. The measurements refer to ...
A Gas-Operated Bearing Damper for Turbomachinery
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A gas-operated bearing damper for turbomachinery has been designed, analyzed, and experimentally investigated in the laboratory. The damper utilizes air bled off from the compressor to power an ...