Search
CSV
RISReview of Materials Processing Literature 1971–72—Part 3: Review of German Language Literature
Publisher: The American Society of Mechanical Engineers (ASME)
Review of Materials Processing Literature 1973–1975, German Language Literature—Part 2: Metal Removal
Publisher: The American Society of Mechanical Engineers (ASME)
Review of Materials Processing Literature 1973–1975, German Language Literature—Part 1: Metal Forming
Publisher: The American Society of Mechanical Engineers (ASME)
On Wedge Indentation and Its Relationship With Incipient Plastic Deformation in Metal Cutting
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper deals with plane strain indentation of annealed brass by both symmetric and half wedges, and the connection between wedge indentation and incipient chip formation by a positive rake ...
Review of Materials Processing Literature—1969–1970: 3—Review of German Language Literature
Publisher: The American Society of Mechanical Engineers (ASME)
Review of Materials Processing Literature—1966–1968: 5—Review of German Language Literature
Publisher: The American Society of Mechanical Engineers (ASME)
An On-Line Tool Wear Sensor for Straight Turning Operations
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper describes the design of an on-line tool wear sensor for straight turning operations, which will lead to the realization of adaptive control for optimization (ACO). Tool wear is ...
On the Wear Mechanisms and Cutting Performance of Silicon Carbide Whisker-Reinforced Alumina
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The objective of this research was to study the types of wear suffered by silicon carbide whisker-reinforced aluminum oxide inserts in the machining of Inconel 718. Further, it was desired to ...
An Analytical and Experimental Study of the Flow of Sheet Metal Between Circular Drawbeads
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper describes an analytical model for determining the pulling and shear forces and bending moment required to form sheet metal subject to plane strain along its width. The model is ...
Mechanics of Tool-Workpiece Engagement and Incipient Deformation in Machining of 70/30 Brass
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In this paper, studies of incipient chip formation when cutting annealed 70/30 brass under orthogonal conditions are presented. Cutting forces were recorded and changes in deformation occurring ...