Search
Now showing items 1-10 of 16
Use of Extreme Value Distributions in Describing the Overloaded Axle Load Data from Pavements
Publisher: ASCE
Abstract: Analysis of overloaded axles has received scant attention during the pavement design process. Such overloaded axles are well known to cause extensive damage to the pavement, though the number of repetitions of such axles ...
Viscoelastic Transition of Unaged and Aged Asphalt
Publisher: American Society of Civil Engineers
Abstract: This investigation reports the viscoelastic solid to fluid transition of asphalt as the temperature is varied. Air blown, blended asphalt and pitch obtained from Arab mix crude were tested under unaged, short-term aged, ...
Review of the uses and modeling of bitumen from ancient to modern times
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In this article, we provide a review of the uses of asphalt from ancient to modern times and we discuss the main attempts at mathematically modeling its behavior. We start with a discussion ...
Thermodynamic Framework for the Constitutive Modeling of Asphalt Concrete: Theory and Applications
Publisher: American Society of Civil Engineers
Abstract: The response of an asphalt concrete pavement to external loading depends on its internal structure. Using a recent framework that associates different natural configurations (for example, stress-free configurations) with ...
Influence of Moisture Damage on Fatigue of Warm Mix and Hot Mix Asphalt Mixture
Publisher: ASCE
Abstract: Quantification of the fatigue life of warm mix asphalt (WMA) is challenging due to various factors such as the extent of aging and moisture susceptibility, to mention a few. Hydrated lime as an antistripping material can ...
Resilient and Permanent Deformation Response of Cement-Stabilized Pond Ash
Publisher: ASCE
Abstract: Cement-stabilized pond ash is often used as an alternative to conventional materials in compacted subgrade and subbases in pavements. The addition of cement to pond ash increases cohesion and improves strength. The effects ...
Influence of Confinement Pressure and Rest Periods on Measurement of Dynamic Modulus of Bituminous Mixtures
Publisher: ASCE
Abstract: In the AASHTO T-378 protocol for computing dynamic modulus and phase angle, the bituminous mixture sample is subjected to a continuous loading from high frequency to low frequency. The postprocessing method involves fitting ...
Influence of Confinement Pressure on the Mechanical Response of Emulsified Cold-Recycled Mixtures
Publisher: ASCE
Abstract: Cold recycling of asphalt pavement is an effective rehabilitation technique in terms of saving natural resources and cost of construction. The current study focuses on cold-recycled asphalt mixture designated as emulsified ...
Impact of Load Transfer during Braking on the Reliability of Bituminous Pavements
Publisher: ASCE
Abstract: This investigation examines the influence of braking on the reliability of bituminous pavements. For this purpose, different loading conditions of a two-axle truck are simulated using vehicle dynamics software. Individual ...
Statistics-Based Design of Experimental Framework to Formulate Ternary RAP Binder Blends
Publisher: ASCE
Abstract: The conventional design approaches for reclaimed asphalt pavement (RAP) mix follow blending rules to select the grade of the virgin binder for hot recycled bituminous mixtures. The interactions of RAP binder with the virgin ...